Compliance Pro™ Data Match
System (Multi-Head or Single-Head)
General Description
The Compliance-Pro™ Data Match System ensures that all
barcodes can be scanned and that the encoded data matches. This
unit is extremely simple to use with only two buttons. The first
button "Learn new barcode" does just that, when the button is
pressed the next barcode scanned will be the encodation saved to be
compared with all future barcodes. When a mismatch or 'no read'
occurs, the system will sound an alarm and close a relay that can
be used to stop the equipment, apply a cover-up label, or reject
the product. The error is cleared either by scanning a good barcode
or by pressing the 'silence' button. Typical uses include rewind
systems and production lines.
Features
|
800.328.2612 |
Equipment Type: On-line Data Matching
System
Operation Modes (Multi / Single): Barcode Data
Match (No ISO/ANSI barcode verification)
Symbologies (Multi / Single):
- GTIN 12 A&E, GTIN 8, GTIN 13 including 2 and 5 digit supplemental codes
- Generic (ANSI Traditional) Interleaved 2 of 5 plus GTIN 14 (I 2/5) Shipping Container Symbol
- Generic (ANSI Traditional) Code 39 plus mod 43 check character; AIAG, LOGMARS, and HIBC formats
- Generic (ANSI Traditional) Code 128; GTIN 14 (GS1 128) Shipping Container Symbol
- Codabar Variant
- Code 93
- DataMatrix *
* Data Match systems for DataMatrix codes require use of
alternate scan head which may affect scan speeds or other
features.
Features (Multi):
- Expandable from 1 to 10 scan heads per system
- Auto-discrimination between symbologies
- 2000 scan per second scan head
- Through Beam / Contrast sensor
- Two relay contact closures and audible alarm (when 'no read' or mismatch occurs)
- Silence/Release of audible alarm and relay closure button
- RS-232 programming port connecting scan head to computer
Features (Single):
- Auto-discrimination between symbologies
- 2000 scan per second scan head
- Through Beam / Contrast sensor
- RS-232 programming port connecting scan head to computer
- Optional Relay Outputs
Parameters Analyzed (Multi / Single): Match of
encoded barcode data
User Interface (Multi):
- Simple 2 button: New Master and Silence
- Bi-color LED (red/green) for each scan head
- Audible tone to indicate fail results
User Interface (Single):
- Simple New Master button
- Visible I/O Indicators
Apertures and Light Source (Multi / Single):
- Variable aperture depending on distance from barcode when scanning
- 660 nm (red light source)
Printer Options (Multi / Single): None
Reflectance Calibration (Multi / Single): None
(unit does not measure reflectance)
Power Source (Multi / Single): UL approved AC
power supply
Service (Multi / Single): Depot service
performed
Physical (Multi):
- Interface controller: 7.0" (178 mm) L x 7.75" (198 mm) W x 2.5" (64 mm) H
- Scanner: 3.0 " (76 mm) L x 2.3" (58 mm) W x 1.6" (41 mm) H
Physical (Single):
- Interface controller: 7.3" (184 mm) L x 6.3" (160 mm) W x 2.8" (71 mm) H
- Scanner: 3.0" (76 mm) L x 2.3" (58 mm) W x 1.6" (41 mm) H
Standards Met: None