Compliance Pro Inspect Products Barcode Verification High Speed Verifiers

Compliance Pro™ Inspect

General Description
The Compliance-Pro™ Inspect is an on-line full ISO 15416/ANSI X.3 barcode verifier (linear symbologies).  This tool provides a solution that is close to the price of a handheld verifier but still offers full 100% on-line barcode verification.  The system is extremely easy to use with a single button (for calibration) and a three bulb light stack (red/yellow/green).  This product inspects the barcode but does not offer barcode analysis to determine the cause of the ISO/ANSI results.



  • Auto-discrimination between symbologies
  • 600 scan per second scan head
  • Two operation modes: Free scan and Sync pulse
  • RS-232 programming port



Equipment Type
• On-line full ISO/ANSI barcode verifier

Operation Modes
• All ISO and ANSI parameters

• GTIN 12 A&E, GTIN 8, GTIN 13 including 2 and 5 digit supplemental codes
• Generic (ANSI Traditional) Interleaved 2 of 5 plus GTIN 14 (I 2/5) Shipping Container Symbol
• Generic (ANSI Traditional) Code 39 plus mod 43 check character; AIAG, LOGMARS, and HIBC formats
• Generic (ANSI Traditional) Code 128; GTIN 14 (GS1 128) Shipping Container Symbol
• Codabar Variant
• Code 93

Parameters Analyzed
• Global Threshold (ISO/ANSI method parameter)
• Reference Decode (ISO/ANSI method parameter)
• Decodability (ISO/ANSI method parameter)
• Modulation (ISO/ANSI method parameter)
• Defects (ISO/ANSI method parameter)
• Edge Contrast (ISO/ANSI method parameter)
• Rmin/Rmax (ISO/ANSI method parameter)
• Symbol Contrast (ISO/ANSI method parameter)
• Overall Symbol Grade (ISO/ANSI method parameter)
• Modulo Check Digits (mandatory symbology and optional application parameters)
• PCS (Traditional method parameter)
• Reflectance - Light (Traditional method parameter)
• Reflectance - Dark (Traditional method parameter)
• Ratio (Traditional method parameter)
• Average Bar Deviation  (Traditional method parameter)
• Minimum Bar Deviation (Traditional method parameter)
• Maximum Bar Deviation (Traditional method parameter)
• Quiet Zone (Traditional method parameter)
• X Dimension (Traditional method parameter)
• Barcode Direction (scanner decoder function)
• Symbology Type (scanner decoder function)
• % Decode (multiple scanning parameter)
• Encoded Data (scanner decoder function)

User Interface
• Single 1 button: Calibrate
• 5 LED indicators:  Power/Sync, Calibration, Barcode read, and Two programmable
• Bi-color LED (red/green) for each scan head
• Three bulb light stack
• Five outputs (open drain FET type):  A/B (>2.5) grade, C (1.5 - 2.5) grade, D/F (<1.5), and two customizable

Apertures and Light Source
• Four available models; 4, 6, or 10 mil scan head
• 660 nm (red light source)

Printer Options
• None

Reflectance Calibration
• Calibration card and protective sleeve provided with each unit

Power Source
• UL approved AC power supply

• Depot service performed 

• Traverse:  24"
• Verification Scanner: 5.0 " (127 mm) L x 4.4" (111 mm) W x 2.4" (60 mm) H

Standards Met
• ISO15416-1 Barcode Print Quality Test Specification
• ISO15426-1 Barcode Verifier Conformance Specification  
• ANSI X3.182-1990 Barcode Print Quality Guideline