site map
© Copyright Symbology, Incorporated 2007. All Rights Reserved.
|
|
 |
 |
Hand Held and Desk Top Verifiers
 General Description
The QC600 verifier analyzes bar code quality against traditional quality parameters and ANSI/CEN/ISO bar code print quality guidelines. Each unit includes all standard symbologies and is manufactured and traceable to N.I.S.T. (National Institute of Standards and Technology) standards developed by the U.C.C. (Uniform Code Council) and AIM (Automatic Identification Manufacturers).
The full-feature QC600 series performs a quick pass/fail tests or can be used as a more powerful measuring tool for highly detailed analysis.
It can be instantly programmed to test bar code specifications by simply scanning command codes, or by using the easy-to-follow programming menu that guides an operator through each step. To accommodate varying label densities the pen wands allow a user to select the appropriate aperture (5, 6, and 10 mil sizes). If needed, a detailed hard copy printout can be produced from any of the Quick Check desktop models using an optional Quick Check printer. Results can also be sent to a PC via an RS-232 communication interface, or the QCViewer software.
Equipment Type
- Portable Bar Code Verifier
Operation Modes
- All ISO15416/ANSI X.3 182 1990 Parameters.
- UPC A & E, EAN 8 & 13 including 2 and 5 digit supplemental codes
- Generic Interleaved 2 of 5, SCC-14 (I 2/5)
- Code 39
- Generic Code 128, SCC-14 (UCC/EAN 128)
- Codabar
- Code 93
- MSI
- Code 16K
- Code 49
- Code 11
Features
- Auto-discrimination between symbologies
- Computer RS-232 serial port transfer of the verification results (QCViewer Software)
- Store and Print capability
- Multiple scan averaging
- Special reflectometer mode
- ‘X’ dimension determination
- Printable scan reflectance profile
User Interface
- 6 buttons: Power, Select, Left, Right, Up, Down
- 4-line x 20 character LCD
- 5 LED’s - indicate average bar deviation (both modes)
- Audible tones indicate pass/fail results, low battery
Printer Options
- Printer: Zebra TLP2843. 4 inch direct thermal printer
Apertures and Light Source
- Three available models; 5, 6 or 10 mil wand
- Light wavelength 660nm (red light source) or 940nm (infrared light source)
Reflectance Calibration
- Plaque attached unit
- Separate calibration plaque
Power Source
- Four AA NiCad rechargeable batteries with AC adapter
Service
Physical
- 5.3" (13.3 mm) L x 4.3" (10.9 mm) W x 2.8" (7.0 mm) D
16 oz. (454 g) wt.
Standards Met
- ANSI X3.182-1990 Bar Code Print Quality Guideline
- ISO15416-1 Bar Code Print Quality Test Specification
- ISO15426-1 Bar Code Verifier Conformance Specification
|
|
|
|
 |
|
