site map
© Copyright Symbology, Incorporated 2007. All Rights Reserved.
|
|
 |
 |
Compliance Pro™ Decoder and Data Match Systems
General Description
The Compliance-Pro™ Data Match Interface Box ensures that all bar codes can be scanned and that the encoded data matches. This unit is extremely simple to use with only two buttons. The first button “Learn new bar code” does just that, when the button is pressed the next bar code scanned will be the encodation saved to be compared with all future bar codes. When a mismatch or ‘no read’ occurs, the system will sound an alarm and close a relay that can be used to stop the equipment, apply a cover-up label, or reject the product. The error is cleared by scanning a good bar code. The alarm and relay are cleared by pressing the ‘silence’ button.
Equipment Type
- On-line Data Matching Interface Box
Operation Modes
- Bar Code Data Match (No ISO/ANSI bar code verification)
Features
- Expandable from 1 to 10 scan heads per system
- Sync pulse input connector
- Two relay contact closures and audible alarm (when ‘no read’ or mismatch occurs)
- Silence/Release of audible alarm and relay closure button
Parameters Analyzed
- Match of encoded bar code data
User Interface
- Simple 2 button: New Master and Silence
- Bi-color LED (red/green) for each scan head
- Audible tone to indicate fail results
Printer Options
Reflectance Calibration
- None (unit does not measure reflectance)
Power Source
- UL approved AC power supply
Service
Physical
- Interface controller: 7.0" (178 mm) L x 7.75" (198 mm) W x 2.5" (64 mm) H
Standards Met
Note: Interface box is designed for use with Microscan MS-9 scan head for linear bar codes. DataMatrix codes require use of alternate scan head.
|
|
|
|
 |
|
