site map
© Copyright Symbology, Incorporated 2007. All Rights Reserved.
|
|
 |
 |
Compliance Pro™ Decoder and Data Match Systems
 General Description
The Compliance-Pro™ Data Match System ensures that all bar codes can be scanned and that the encoded data matches. This unit is extremely simple to use with only two buttons. The first button "Learn new bar code" does just that, when the button is pressed the next bar code scanned will be the encodation saved to be compared with all future bar codes. When a mismatch or 'no read' occurs, the system will beep and close a relay that can be used to stop the equipment, apply a cover-up label, or reject the product. The error is cleared either by scanning a good bar code or by pressing the 'silence' button.
Equipment Type
- On-line Data Matching System
Operation Modes
- Bar Code Data Match (No ISO/ANSI bar code verification)
Symbologies
- UPC A & E, EAN 8 & 13 including 2 and 5 digit supplemental codes
- Generic (ANSI Traditional) Interleaved 2 of 5 plus SCC-14 (I 2/5) Shipping Container Symbol
- Generic (ANSI Traditional) Code 39 plus mod 43 check character; AIAG, LOGMARS, and HIBC formats
- Generic (ANSI Traditional) Code 128; SCC-14 (UCC/EAN 128) Shipping Container Symbol
- Codabar Variant
- Code 93
Features
- Expandable from 1 to 10 scan heads per system
- Auto-discrimination between symbologies
- 2000 scan per second scan head
- Sick Optic KT5 label sensor
- Two relay contact closures and audible alarm (when 'no read' or mismatch occurs)
- Silence/Release of audible alarm and relay closure button
- RS-232 programming port
Parameters Analyzed
- Match of encoded bar code data
User Interface
- Simple 2 button: New Master and Silence
- Bi-color LED (red/green) for each scan head
- Audible tone to indicate fail results
Apertures and Light Source
- Variable aperture depending on distance from bar code when scanning
- 660 nm (red light source)
Printer Options
Reflectance Calibration
- None (unit does not measure reflectance)
Power Source
- UL approved AC power supply
Service
Physical
- Interface controller: 7.0" (178 mm) L x 7.75" (198 mm) W x 2.5" (64 mm)H
- Traverse: 42"
- Scanner: 3.0" (76 mm) L x 2.3" (58 mm) W x 1.6" (41 mm) H
Standards Met
|
|
|
|
 |
|
