Compliance Pro™ Inspect - Thermal Transfer

General Description
The Compliance-Pro™ Inspect - Thermal Transfer is a full ISO/ANSI independent barcode verification system for linear symbologies. The meticulous design allows for integration with virtually any thermal transfer printer or on demand print system. The system inspection head is set to a specified quality level, and a signal is sent to stop the printer or illuminate a warning light if a code fails the specified grade. The unique media platform holds the inspection head steady at the required distance and angle from the printed barcode.   An optional rewinder can be added for increased efficiency.

Features On-line full ISO/ANSI barcode verifier head Scan head bracket and media platform Light stack Inspection head software Cabling and power supply Printer Card

800.328.2612

Thermal Transfer Barcode Inspection

Operational Speed
• 100 decodes per second - Standard
• 200 decodes per second - High Density
• Scans per code

Symbologies

• GTIN 12 A&E, GTIN 8, GTIN 13 including 2
  and 5 digit supplemental codes
• Generic (ANSI Traditional) Interleaved 2
  of 5 plus GTIN 14 (I 2/5) Shipping Container Symbol
• Generic (ANSI Traditional) Code 39 plus mod 43 check character; AIAG,
  LOGMARS, and HIBC formats
• Generic (ANSI Traditional) Code 128; GTIN 14 (GS1 128) Shipping
  Container Symbol
• Codabar Variant
• Code 93
• Auto discrimination between symbologies

Parameters Analyzed   (All ISO/ANSI Parameters)
• Global Threshold/Reference Decode
• Decodability
• Modulation
• Defects
• Edge Contrast
• Rmin/Rmax
• Symbol Contrast
• Overall Symbol Grade
• Modulo Check Digits (mandatory symbology and optional application parameters)

User Interface
• Signal output via printer card
• Three bulb light stack

Apertures and Light Source
• Two available models; Standard (6.6 mil +) or HR (5 mil +) scan head
• 660 nm (red light source)

Printer Options
• Any Thermal Transfer, Direct Thermal, or On Demand printer capable of producing a web of printed barcodes

System requirements
• PC
• Thermal transfer printer

Reflectance Calibration
• Calibration card and protective sleeve provided with each unit

Power Source
• UL approved AC power supply

Service
• Depot service performed 

Physical
• Variable
• Verification Scanner: 5.0 " (127 mm) L x 4.4" (111 mm) W x 2.4" (60 mm) H

Standards Met
• ISO15416-1 Barcode Print Quality Test Specification
• ISO15426-1 Barcode Verifier Conformance Specification  
• ANSI X3.182-1990 Barcode Print Quality Guideline